Show 5.0 顆星,最高 5 顆星 As avertised, very powerful. I got this because the laser that I got with my Ortur cutter was not strong enough to cut through the MDF board that I use for templating. This laser was advertised as twice as strong and while I don't know the cutting strength, it does cut though the board in a single pass what my older 5w laser would struggle to cut in 4-5 passes. The delivery process took a little longer then I expected, but coming from China I knew it was going to take a while. I contacted the setting about the slow delivery and they quickly responded and I had the product in a few more days. Been very happy with this laser so far. 含圖像的評論過濾評論熱門評論美國目前篩選評論時出現問題。 請稍後再試。Reviewed in the United States 🇺🇸 on 2022年8月6日 I am having the same problem that the other customer had because I can't cut any deeper than 2.8mm in pine. I am using PWM and the Laser is set at 100% which is 0-1000. Based on the laser specifications I should be able to cut 8~10 mm Basswood Plywood and Pine Broad in one pass using the 2mm spacer per your drawing. I have varied the 45mm focal length in both directions and can only achieve the 2.8mm depth. The only variable I have would be the frequency setting and I do not know what that setting should be. Reviewed in the United States 🇺🇸 on 2022年8月19日 Upgraded from Ortur M2P and this has been a great change for cutting. Still working on settings for burns. Reviewed in the United States 🇺🇸 on 2022年7月2日 It was a combo deal. Laser head with air assist pump. The hose that came with the pump was to big for the nozzle that came with the laser head. Not cool but I made it work. Reviewed in the United States 🇺🇸 on 2022年4月1日 I got this because the laser that I got with my Ortur cutter was not strong enough to cut through the MDF board that I use for templating. This laser was advertised as twice as strong and while I don't know the cutting strength, it does cut though the board in a single pass what my older 5w laser would struggle to cut in 4-5 passes. The delivery process took a little longer then I expected, but coming from China I knew it was going to take a while. I contacted the setting about the slow delivery and they quickly responded and I had the product in a few more days. Been very happy with this laser so far. 5.0 顆星,最高 5 顆星
As avertised, very powerful. I got this because the laser that I got with my Ortur cutter was not strong enough to cut through the MDF board that I use for templating. This laser was advertised as twice as strong and while I don't know the cutting strength, it does cut though the board in a single pass what my older 5w laser would struggle to cut in 4-5 passes. The delivery process took a little longer then I expected, but coming from China I knew it was going to take a while. I contacted the setting about the slow delivery and they quickly responded and I had the product in a few more days. Been very happy with this laser so far. 本評論中的圖像 Reviewed in the United States 🇺🇸 on 2022年8月1日 Fast shipping. Well packaged. Exactly as described. So far works perfect. Reviewed in the United States 🇺🇸 on 2022年6月2日 I took a chance on these lasers, as they were newly on the market and purchased two of them. In fact, when I purchased these laser modules, there were no reviews written yet. It took several weeks for them to arrive but, when they did arrive, I wasn't disappointed. These Laser Tree modules are worth every dime I paid for them... Reviewed in the United States 🇺🇸 on 2022年4月4日 I have been impressed by the added capability this laser added to my homebrew machine. I built it a few years ago with a 2.5 watt laser. I was able to engrave wood and cut heavy paper but that was about it. With this 10W unit I just finished a project engraving glass! (Glass is first coated with flat black paint which is later removed). I have been able to cut 1/4 inch plywood. The power is greater and the focal point spot is much smaller that my original. Reviewed in the United States 🇺🇸 on 2022年8月6日
It does pretty well with engraving on different materials, but when it comes to cutting, you need to keep the power below 75% or it will stop working until it cools off, leaving a lots of uncut areas. The main reason I got it was to cut. It's a no go for me. 來自其他國家的熱門評論5.0 顆星,最高 5 顆星 Laser has stopped working. 於 2022年6月7日 在加拿大 (🇨🇦) 發表評論 Was working good for just under a month and then laser has stopped working. Not a happy customers.Update,After talking with seller they are sending new module. Customer support is awesome. 5.0 顆星,最高 5 顆星 Llego a tiempo 於 2022年7月15日 在墨西哥 (MX) 發表評論 Es de buen funcionamiento para trabajos pequeños y caseros |